Talbot County, Maryland: what's under and around your house
By Chris · Last reviewed
Talbot County is in EPA radon Zone 3 (low potential). Its building-code climate zone is 4A (humid). It gets about 45.3 inches of precipitation a year. Whatever the maps say, the only way to know your own home's radon level is to test it.
At a glance
- Radon (EPA prediction)
- Zone 3 (low potential)A county-wide prediction from EPA's 1993 map, not a measurement. EPA recommends testing every home.
- Climate zone
- Climate zone 4A, humid (Mixed-Humid)Used by the building code for insulation and crawlspace rules.
- Precipitation
- 45.3 in/yr1991–2020 average. Wetter than 57% of U.S. counties (the national county median is 42.5 in). Wettest month: August.
- Termites
- Check locallyA broad regional map; there is no official county-level termite data.
- Self-supplied water (wells)
- About 19,803 people53% of residents in 2015 not on a public water system.
- Arsenic in wells
- About 1,318 well users estimated above the limitA USGS model estimate, not test results.
Radon
EPA puts this county in Zone 3 (low potential), a predicted county average below 2 pCi/L.This is EPA's prediction for the county as a whole, based on geology and other factors when the map was made in 1993. It is not a reading from any home, and homes in every zone have tested high.
EPA recommends testing every home, regardless of zone.
Crawlspace moisture
Talbot County is in building-code Climate zone 4A, humid (Mixed-Humid) under the 2021 International Energy Conservation Code (DOE/PNNL county list).
In humid climates, summer outdoor air often carries more moisture than a crawlspace can hold at its cooler temperature. Air that comes in through foundation vents can condense on ducts, pipes, joists and the ground cover, which is a common route to wet insulation and mold.
The building code allows either a vented crawlspace or a sealed (unvented) one. In humid areas, a sealed crawlspace built to code, with a continuous ground vapor retarder, closed vents and a way to dry the air, avoids bringing that summer air in. A vented crawlspace can still work when the ground is fully covered and the site drains well.
What Maryland's building code allows
The options for a sealed crawlspace depend on which edition of the International Residential Code your state or city has adopted. The 2015 edition lists three ways to dry the air (a continuous exhaust fan, a conditioned-air supply, or an air plenum); later editions add a dehumidifier. Ask your local building department which edition it enforces (2015 IRC, 2021 IRC).
Precipitation averages 45.3 inches a year, with the most in August. Gutters, downspout extensions and ground that slopes away from the foundation keep most of that water out of the crawlspace.
Vented vs. sealed crawlspaces · Signs of moisture and mold · Vapor barriers and encapsulation
Termites and pests
The building code uses a national map that splits the country into four broad termite regions, from “none to slight” to “very heavy”. It is not detailed enough to rate individual counties, and each local building department decides what applies. We have not yet confirmed Maryland's region from an official source, so check with your county or city building department. The map and the code's termite rules are in IRC Chapter 3.
Whatever the region, an annual crawlspace inspection catches termite mud tubes, rodent droppings and chewed insulation early. Rodents, termites and other pests
Well water
In 2015, about 19,803 people in Talbot County (53% of residents) supplied their own household water, usually from a private well (USGS). Nobody tests a private well for you; the owner is responsible.
USGS estimates that about 1,318 well users in this county drink water above the federal arsenic limit (10 micrograms per liter). The likely range is 854 to 2,018. This is a model estimate (USGS, 2017), not test results, and it cannot tell you about your own well.
Where to test and who's certified
Maryland statewide
Not yet fully verified (last looked at November 15, 2026). Confirm with the agency before you rely on it.
State radon contact
Radon Program, Maryland Department of the Environment (with Maryland Department of Health). Phone: 1-866-703-3266 (MDH help line); 410-537-3193 (MDE)
Free or low-cost radon kits
Maryland residents may be eligible for a free radon test kit, ordered online through the state's kit link.
Price: Free for eligible residents · Timing: Not stated (state promotes January as Radon Action Month)
Who can test and fix radon
We found no Maryland license for radon pros. State pages point to the NRPP and NRSB directories.
Nearby counties in Maryland
Sources
- EPA Map of Radon Zones, U.S. Environmental Protection Agency. County zones from the 1993 map; county data file dated June 2024.
- Guide to Determining Climate Zone by County (PNNL-33270) and county data files, U.S. Department of Energy / Pacific Northwest National Laboratory. 2021 IECC / ASHRAE 169-2013 county assignments, September 2022.
- nClimDiv county climate averages, 1991-2020, NOAA National Centers for Environmental Information. Area-weighted county values from a 5 km grid; NCEI notes these are not official station normals.
- Estimated Use of Water in the United States, County-Level Data for 2015, U.S. Geological Survey. Self-supplied domestic population (people not on a public water system).
- Estimated arsenic concentrations in domestic well water, county summaries (Ayotte, Medalie and Qi, 2017), U.S. Geological Survey. Modeled number of domestic-well users above 10 micrograms per liter, 2010 population basis. Lower 48 states only.
- 2021 International Residential Code, Chapter 3: Building Planning (free read-only), International Code Council. Section R301.2 and the termite infestation probability map; Section R318 termite protection.
- 2020 Census Gazetteer Files: Counties, U.S. Census Bureau. County names and FIPS codes.
How we source and update this page. County FIPS 24041.