Skip to content
UnderYourHouse

How to test a private well

By Chris · Last reviewed

If your water comes from your own well, nobody else tests it. Public water systems must meet federal limits; private wells don't, so the owner is responsible for testing and treatment.

What to test, and how often

EPA and CDC both say to test your well at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH (EPA; CDC).

  • Coliform bacteria show whether surface water or waste may be getting into the well. A positive E. coli result is a reason to stop drinking the water until it is fixed and retested.
  • Nitrate comes from fertilizer, manure and septic systems. The federal limit for public water is 10 mg/L as nitrogen (EPA). It matters most for infants.
  • Total dissolved solids and pH tell you about the water's general chemistry and whether it may corrode pipes.

Test more often, or for more, when

  • the well floods, or has been repaired or replaced;
  • the water's taste, smell or color changes;
  • someone in the home is pregnant or there is a baby;
  • you are buying a home with a well (some loans require one);
  • there are known problems nearby, such as arsenic, uranium or radon in local groundwater.

Arsenic and other metals

Arsenic occurs naturally in some rock. The federal limit for public water is 10 micrograms per liter (0.010 mg/L) (EPA). Our county pages show a USGS model estimate of how many well users are above that level (USGS, 2017). A low number doesn't clear your well, and a high one doesn't mean yours is affected. Test at least once, and when you buy a home.

Where to test

  • Your county health department. Many sample wells for bacteria for a fee. County pages list the ones we confirmed on official pages.
  • Your state's public health lab. Some states, Indiana for example, test private wells for residents.
  • A state-certified drinking-water lab. Every state certifies labs; EPA keeps the directory of state lists.
  • Mail-in test kits. Convenient for wide panels, but check whether the lab is certified in your state if you need results for a loan or a health department.

Kentucky well owners

Kentucky's Division of Water advises: “You should have your well water tested annually for coliform bacteria. Your local health department can provide this service, or you may consider using a private laboratory.” (Water Well Owner's Guide)

Taking a good sample

  • Use the bottle the lab gives you, and follow its instructions exactly. Bacteria samples often must reach the lab within 24 hours.
  • Sample from a cold-water tap that doesn't have a filter or softener, unless you're testing treated water on purpose.
  • Don't touch the inside of the bottle or cap.

If you also have high indoor radon and use a well, ask about testing your water for radon too. See testing your home for radon.

Find your county's radon zone, climate zone and local testing contacts

General information, not professional or medical advice. Conditions vary from house to house. Test your own home, and talk to a certified professional, your local health department or your doctor before you act on anything here.