Skip to content
UnderYourHouse

Vapor barriers and encapsulation, explained

By Chris · Last reviewed

A sealed crawlspace with white plastic sheeting covering the floor and walls, and insulated ducts overhead

“Vapor barrier” and “encapsulation” get used loosely, and the difference can mean thousands of dollars. Here is what the words usually mean, and what the code actually requires.

Three different jobs

1. A ground vapor barrier (vapor retarder)

Plastic sheeting laid over the dirt floor to slow moisture coming up from the soil. The code calls it a Class I vapor retarder. In a vented crawlspace, covering the ground lets the code reduce the vent area from 1 square foot per 150 square feet of floor to 1 per 1,500 (Residential Code of Ohio, Section 408, 2018 IRC basis). On its own, a ground cover leaves the vents open.

2. A sealed (unvented) crawlspace

The code's unvented option. The vapor retarder is continuous, with seams overlapped 6 inches and sealed or taped, and edges run at least 6 inches up the foundation walls and sealed. The vents are closed, and the air is dried by one of the code's methods: exhaust fan, conditioned air, plenum or (where your code allows it) a dehumidifier. See vented vs. sealed for the details.

3. “Encapsulation”

A marketing word, not a code term. It usually means a sealed crawlspace with a heavier liner run further up the walls, sealed vents and a dehumidifier, and sometimes wall insulation, drainage and a sump pump. Ask exactly which of those a quote includes.

Questions to ask a contractor

  • Which code section is this built to, and will you pull a permit if one is required?
  • Where is the water coming from, and how does this proposal stop it?
  • How will the air be dried, and who maintains the dehumidifier or fan? Where does its water drain?
  • Will you leave an inspection gap at the top of the wall for termite inspections?
  • How does this work with a radon system, now or later?
  • Is there a furnace or water heater in the crawlspace that needs combustion air?
  • What does the warranty cover, and for how long? Get it in writing.

What it costs

We could not find a current neutral source for sealed-crawlspace or encapsulation costs.The cost figures you'll see online come from contractors and lead-generation sites. The only neutral figures we found are historical: in 2005, Advanced Energy, a nonprofit doing DOE-funded crawlspace research, reported closed-crawlspace prices in one North Carolina market of $4,200 to $6,700 for a 2,000 sq ft house, plus $1,500 to $3,000 for wall insulation (Home Energy, 2005). Those are about 20 years old and from one market, so treat them only as a sense of scale. Get several written quotes that spell out the scope.

Thicker isn't always the point

Liners are sold by thickness (mil). Heavier sheeting stands up better to people crawling on it, but the code cares about the vapor-retarder class and the sealed seams and edges. A thick liner with open seams doesn't meet the unvented-crawlspace rules.

Related guides

Find your county's radon zone, climate zone and local testing contacts

General information, not professional or medical advice. Conditions vary from house to house. Test your own home, and talk to a certified professional, your local health department or your doctor before you act on anything here.