Skip to content
UnderYourHouse

Fayette County, Illinois: what's under and around your house

By Chris · Last reviewed

Fayette County is in EPA radon Zone 2 (moderate potential). Its building-code climate zone is 4A (humid). It gets about 43.4 inches of precipitation a year. Whatever the maps say, the only way to know your own home's radon level is to test it.

At a glance

Radon (EPA prediction)
Zone 2 (moderate potential)
A county-wide prediction from EPA's 1993 map, not a measurement. EPA recommends testing every home.
Climate zone
Climate zone 4A, humid (Mixed-Humid)
Used by the building code for insulation and crawlspace rules.
Precipitation
43.4 in/yr
1991–2020 average. Wetter than 52% of U.S. counties (the national county median is 42.5 in). Wettest month: May.
Termites
Check locally
A broad regional map; there is no official county-level termite data.
Self-supplied water (wells)
About 4,158 people
19% of residents in 2015 not on a public water system.
Arsenic in wells
About 134 well users estimated above the limit
A USGS model estimate, not test results.

Radon

EPA puts this county in Zone 2 (moderate potential), a predicted county average between 2 and 4 pCi/L.This is EPA's prediction for the county as a whole, based on geology and other factors when the map was made in 1993. It is not a reading from any home, and homes in every zone have tested high.

EPA recommends testing every home, regardless of zone.

Radon has no smell or color, and neighboring houses can test very differently. A short-term test kit costs little and takes a few days. EPA recommends fixing the home if the level is 4 pCi/L or higher. How to test · If your result is high

Crawlspace moisture

Fayette County is in building-code Climate zone 4A, humid (Mixed-Humid) under the 2021 International Energy Conservation Code (DOE/PNNL county list).

In humid climates, summer outdoor air often carries more moisture than a crawlspace can hold at its cooler temperature. Air that comes in through foundation vents can condense on ducts, pipes, joists and the ground cover, which is a common route to wet insulation and mold.

The building code allows either a vented crawlspace or a sealed (unvented) one. In humid areas, a sealed crawlspace built to code, with a continuous ground vapor retarder, closed vents and a way to dry the air, avoids bringing that summer air in. A vented crawlspace can still work when the ground is fully covered and the site drains well.

What Illinois's building code allows

Illinois has no single statewide residential code. Cities and counties adopt their own, often an edition of the IRC, so which sealed-crawlspace options apply depends on where you live. Ask your local building department which edition it enforces. (Illinois Capital Development Board: codes FAQ)

Precipitation averages 43.4 inches a year, with the most in May. Gutters, downspout extensions and ground that slopes away from the foundation keep most of that water out of the crawlspace.

Vented vs. sealed crawlspaces · Signs of moisture and mold · Vapor barriers and encapsulation

Termites and pests

The building code uses a national map that splits the country into four broad termite regions, from “none to slight” to “very heavy”. It is not detailed enough to rate individual counties, and each local building department decides what applies. We have not yet confirmed Illinois's region from an official source, so check with your county or city building department. The map and the code's termite rules are in IRC Chapter 3.

Whatever the region, an annual crawlspace inspection catches termite mud tubes, rodent droppings and chewed insulation early. Rodents, termites and other pests

Well water

In 2015, about 4,158 people in Fayette County (19% of residents) supplied their own household water, usually from a private well (USGS). Nobody tests a private well for you; the owner is responsible.

USGS estimates that about 134 well users in this county drink water above the federal arsenic limit (10 micrograms per liter). The likely range is 103 to 176. This is a model estimate (USGS, 2017), not test results, and it cannot tell you about your own well.

How to test a private well

Where to test and who's certified

Illinois statewide

Not yet fully verified (last looked at November 15, 2026). Confirm with the agency before you rely on it.

State radon contact

Radon Program, Illinois Emergency Management Agency and Office of Homeland Security (IEMA-OHS). Phone: (800) 325-1245 (radon information line); (217) 782-1325 (program staff)

Free or low-cost radon kits

IEMA lists labs that sell low-cost radon detectors to Illinois residents. The American Lung Association has also offered discounted kits each January while supplies last.

Price: $6.95 to $30.00 per detector, as listed by IEMA (checked Nov 15, 2026) · Timing: Year-round from the listed labs; ALA discounts announced in January

  • AccuStar Labs, Harrisburg, PA: AC $30.00
  • AccuStar Labs, Ward Hill, MA: AC $30.00 · AT $28.00 · LS $25.00
  • Air Chek, Mills River, NC (il.radon.com): AC $7.95 · AT $21.95
  • Alpha Energy Laboratories, Carrollton, TX: AC $10.95
  • Radon Testing Corporation of America, Elmsford, NY: LS $6.95
  • RSSI, Morton Grove, IL: AC $15.00 · AT $25.00

AC = activated charcoal and LS = liquid scintillation (short-term tests); AT = alpha track (long-term test). Prices as listed by IEMA on an undated page, checked Nov 15, 2026.

How to get a kit

Who can test and fix radon

Illinois licenses radon measurement and mitigation professionals and labs. You can search active licensees by service county, city, or license type.

State list of licensed professionals · NRPP search · NRSB search

Testing well water

Most local health departments can help test well water for bacteria and nitrate. Illinois EPA posts lists of labs accredited for chemical tests and IDPH-certified labs for bacteria tests. IDPH will explain your results for free.

Certified lab list

Nearby counties in Illinois

All Illinois counties and statewide resources

Sources

  1. EPA Map of Radon Zones, U.S. Environmental Protection Agency. County zones from the 1993 map; county data file dated June 2024.
  2. Guide to Determining Climate Zone by County (PNNL-33270) and county data files, U.S. Department of Energy / Pacific Northwest National Laboratory. 2021 IECC / ASHRAE 169-2013 county assignments, September 2022.
  3. nClimDiv county climate averages, 1991-2020, NOAA National Centers for Environmental Information. Area-weighted county values from a 5 km grid; NCEI notes these are not official station normals.
  4. Estimated Use of Water in the United States, County-Level Data for 2015, U.S. Geological Survey. Self-supplied domestic population (people not on a public water system).
  5. Estimated arsenic concentrations in domestic well water, county summaries (Ayotte, Medalie and Qi, 2017), U.S. Geological Survey. Modeled number of domestic-well users above 10 micrograms per liter, 2010 population basis. Lower 48 states only.
  6. 2021 International Residential Code, Chapter 3: Building Planning (free read-only), International Code Council. Section R301.2 and the termite infestation probability map; Section R318 termite protection.
  7. 2020 Census Gazetteer Files: Counties, U.S. Census Bureau. County names and FIPS codes.

How we source and update this page. County FIPS 17051.

General information, not professional or medical advice. Conditions vary from house to house. Test your own home, and talk to a certified professional, your local health department or your doctor before you act on anything here.